Where rust is showing at the surface, treat as for iron or steel. Where the surface is unbroken, treat as suggested for aluminium. Allow time to dissolve the rust, then rinse away with clean water and buff dry with a cloth. Aluminium or ChromeĪpply the remover to a wet surface. After one hour or more, the surface is ready to be painted. Once the rust is dissolved, rinse with water, and wipe the surface dry. Medium to light rust will be dissolved in 10 minutes or less, while heavier deposits may require a second application. Cleaning time will vary according to the severity of the rust. Continue to apply the remover as needed, to keep the surface wet. Turn sprayer to “SPRAY” position, and apply remover liberally to surface. Clean parts and allow to dry before reassembling. Disassemble units composed of moveable parts before applying remover. Continue to apply the remover as needed, to keep the surface wet until the rust is dissolved. Rinse the metal with water, to break the surface tension and wash away any loose dirt.
#RUST REMOVER SPRAY REGISTRATION#
High-performance rust remover with food registration (NSF - H1) 1 variation. On heavy rusted surfaces, remove any loose rust particles with a wire brush. Mineral oil-free, high-tech rust remover with KENA ® microfluid formula for loosening seized connections and for cleaning surface rust and rust spots. Remove any oil, grease, or dirt from the surface to be treated. Instructions to Use Krud Kutter Rust Remover Gel General Instructions Removes rust/oxidation from metal prior to painting.
Rust Remover is recommended for cast iron, stainless steel, aluminium, galvanized, chrome and brass. Krud Kutter Rust Remover is a proprietary formulation that penetrates into the voids of a metal surface and dissolves rust and oxidation through chemical action.